202 S. 30TH Street, Phoenix, Az. 85034

Frp Panels Section

Office # 602-267-1121

If you belong to the construction industry, then you may have heard about frp panels. The abbreviation stands for fiberglass reinforced panels. They are used most of the time in ceilings and walls. There are many benefits to using frp panels. The benefits include superior moisture resistance, very simple to clean, scratch resistant surface, and very durable.

Most often you see them in restaurants, restrooms, and classrooms. They are made from strong polyester resin which is then reinforced with fiberglass. These panels can provide a very smooth wall surface. If you have a room that you want to decorate in a certain way and you want it to be stain resistant, then using frp panels can certainly fulfill that need.

Frp Wall Paneling Installation Video by Crane Composites

This is a manufacturer video that goes into detail on how to install frp panels correctly. The video references the Kemlite Crane Glasbord Frp Panel throughout the instructions. However, these instructions can be applied to all frp panel installations. If you have any questions you can call us or leave a comment below in the comments section.


The following list covers several important advantages of using frp panels:

1. Frp panels won’t corrode or rust and at the same time, they will not allow the growth of mildew and mold.

2. When preferred over other building materials, you’ll be amazed of how much money you will save.

3. Extreme flexibility.

4. High impact resistance from scratches and shattering.

5. Easy to install and maintain.

6. Improved chemical resistance.

7. Maximum sanitation protection.

8. They are lightweight, so they can be easily managed and installed.

9. Cleaning is quite simple and you’ll just need to use steam, high pressure washers or regular detergents.

10. Lastly, fiberglass reinforced panels will provide you a strong scratch resistant surface.

Applications of Frp PanelsFrp Wall Paneling Colors

Most of the time, you’ll see them installed in recreational areas, cooling towers, hallways, hospital rooms, classrooms, offices, dining rooms, restrooms and of course kitchens. If you want, you can also install them over substrates, but one thing to keep in mind is that the method used for installing them will differ. If you have any questions on the various applications, contact a recommended licensed qualified frp panels contractor.

Installing Frp Panels Over Drywall

This is probably one of the main questions asked, can you install them over drywall? The good news is that you can indeed install them over drywall, but you will have to use a special adhesive. The adhesive needs to be solvent free only over surfaces that are considered porous, such as plaster, plywood, drywall and concrete block walls. If you are installing these panels over surfaces that are non porous, like wall tiles, then you’ll need to make use of a special kind of adhesive. For the installation to be great though, you may want to sand the tiles, because in this way the fiber reinforced plastic panels could adhere better.

Installing Frp Panels Flat against the Wall

If you want, you can also install them flat against the wall as they are very flexible. However, you do need to keep in mind that just as any other building material, it’ll eventually contract and expand based on the temperature of the area where it is installed. Installing them also requires a few simple tools, like a laminate roller, the manufacturer’s recommended trowel, carbide drill bit and a fine tooth saw blade.

How to Install Frp Panels Faster?

If you’re in a hurry, then you’ll definitely want to install these panels faster and the good news is that they can be shipped with drywall or eps insulation. When ordering this type of frp panels, you’ll be able to install them faster. Not only that, but they’ll also account for a smoother surface due to the fact that you’ll no longer have to use rivets. How great is that? Installing frp panels can indeed make your life easy.

Common Installation Errors

There are certain mistakes which people usually make.

Some severe ones worth mentioning are:

1. Ill-prepared wall surfaces

2. Failure to choose appropriate adhesive

3. Wrong usage of adhesive

4. Inappropriate trowel selection & use

5. Restricting free expansion of the frp panels




Fiberglass Reinforced Plastics or Frp Panels are being widely used in the construction and storage industry. Glasteel Frp Panels, to be specific, are high in quality because by far, these are known to be the best chemically processed material that not only has high resistance to corrosion but also is sturdy, durable and light in weight.

Crane Composites


Is one of the world’s leading frp manufacturers. Its products are used in hospitals, food processing plants, and schools among other applications. Crane Composites prides itself on innovation and its research and development is constantly being evaluated and product improvements are on going.

Crane Glasbord Frp Panels with Surfaseal is one the company emphasizes in its promotions. Glasbord is mold and mildew free with moisture resistance. It is something that is best used wherever there is a need to comply with USDA/FSIS standards. Crane has an environmental commitment to recycle and trim waste. Product innovations include efforts to reduce fuel consumption for buyers, and controlling emissions. The commitment to environmental concerns has resulted in many of the company’s construction products obtaining GREENGUARD ® certification.



A primary feature of its products is the attention made to durability. The Panolam Frp Panels manufactured are noted for impact resistance, and the ability to resist rot or splintering. The Panolam product is also noted for being able to withstand mildew and chemicals that might weaken the panels. The company’s frp panels are noted for being able to handle extreme changes in temperature or level of humidity in the area. Panolam Frp is offered either in a Classic Collection that gives a range of basic colors, or a Pioneer Collection where the selection is much richer. Panolam also has a commitment to the environment and the frp panels product of this company has GREENGUARD ® Gold Certification.



The Marlite company has a dedication to durability as well as aesthetic value. They are meant to blend in well with the area at the same time provide all of the benefits expected of frp process. The Induro ™ Decorative Laminate frp produced by the company is noted for being wear resistant and also its ability to coordinate with wood grains, solid colors, and abstract laminates. The product is used extensively in the healthcare industry. What is common to all of the above companies is a firm commitment to the environment and the impact that the production of their panels might have. Each one specifically comments on its unique sensitivity to recycling and the use of sustainable material. Marlite makes a point of working only with those vendors who share the company’s belief in environmentally responsible practices.

Water-based adhesive is being used more frequently in the company which only uses coatings that are hazardous air pollutant (HAPS) compliant. Panolam has strategically located its distribution and manufacturing facilities to limit the use of fossil fuel when delivering the finished product. Up to 60% of the material it uses to manufacture laminates is paper-based drawn from recycled resources. Crane Composites uses Six Sigma and Kaizen projects to reduce the scrap waste created, and engages in recycling programs with both customers and vendors. All three companies are committed to ongoing research and development into the frp product that is produced.

The benefits to customers are apparent in durability, ease of maintenance, and most importantly the cost. Installation of the panels from each company is much easier than use of ceramic, and that by itself is a cost savings in time. Frp panels are made of a fiber reinforced polymer (FRP). The fibers may be glass or carbon, and the polymer used can be epoxy or polyester thermo-setting plastic, depending on the manufacturer. An ordinary consumer may not know much about these but frp panels are used by the construction industry. They are particular useful in hospitals and laboratories because they are easier to clean than other construction materials, and panels are part of the walls or ceiling.

There are number of companies that manufacture frp panels and it isn’t surprising that they will use different materials to create their unique product. The manufacturers will no doubt admit that at one time their particular product was pretty much a nondescript element in the construction industry. That is radically changing with the economy. Health care is becoming an extremely important sector, and standards for safety and cleanliness are quite high. These panels are considered the best construction components to use in hospitals and laboratories. The reliance on these panels by the healthcare industry is a sure guarantee that all three companies are going to be busy filling orders for their product. The commitment to the environment and to research will assure that the panels will be of high quality.

Desert Building Materials - Frp Panels

Types of Finish and Common Sizes

The use of frp panels has been on the rise in the recent few years. Construction experts are finally recognizing the immense benefits that they can avail with this advanced technology. With a variety of sizes available and with its wide applicability on multiple surfaces, customers are spoiled for choice. It is always essential to know that not all panels are created with the same quality. Differences in quality and design exist from one type to the other and such differences can impact on the service life of the panels. Regardless of the surface on which to install these panels, it is essential to have in mind this crucial tip among others.

Common Custom Sizes

Most are available in standard sizes and thicknesses between 0.060 and 0.125. They are 4 feet in width and range between the length of 8 and 12 foot. These panels are also available in rolls. This is mostly for the use of a large surface area either in domestic or commercial scale.

Low Cost

They are not only preferred for their assured durability but also for the low cost in purchasing and installation. The best frp panels in the market are supposed to be easy to install for both professional individuals and novices. They are easy to handle regardless of the surface or construction type. There are no specific tools to be used and all you need is a saber saw or an electric drill to cut the panels size. You can ensure a water resistant installation by using the appropriate adhesive and water sealants.

Applied Applications

Frp panels can be applied on a variety of surfaces. In industrial places, these panels are used in research labs, meat lockers, refrigerated warehousing etc. With a thickness ranging between 0.120 and 0.5″, they are excellent for all kinds of commercial surfaces too. They are essential in the construction of walls for farmhouses, warehouses and kitchens.

Types of Finishes

There are also frp panels with a non-embossed finish although they are not much preferred. There are several advantages that come with an embossed finish that make it to have a superior performance over the non-embossed types. The first major one is abrasion resistance. Embossed finish comes with bumps on the surface meaning that any abrasion suffered by the panel is only limited to the bumps. Without the bumps, the entire surface becomes susceptible leading to bacteria growth, discolorations and staining. An embossed finish makes it possible to hide any abrasion suffered which is not always the case with non-embossed finishing. Another major benefit of an embossed finish is the prevention of possible fiber breakout. When it comes to embossed finish, the fibers are well concealed below the surface, unlike the non-embossed types where it is closer to the surface. In case of an abrasion, for the non-embossed surfaces, there is easy penetration of microorganisms deep into the panel reducing sanitation.

Most Popular Surfaces

Frp panels are manufactured for two most popular finishes so as to fit the most pressing applications. There is the traditional pebbled surface finish that is often appropriate for the outdoor and floors and there is the traditional smooth finish that is often preferred for indoor surfaces, restaurants, kitchens and other places that require constant cleaning. Both these surfaces are meant to ensure a sparkling look.

Major Advantages

The major advantage of frp panels over other technologies is the superior strength compared to the weight. For materials such as concrete and metals, they have a lower strength to weight ratio and are often difficult to install and require immense materials, manpower and equipment to effectively install. Frp panels however are lightweight and do not need much in terms of labor and equipment. Cost efficiency is also a major gain. The ease of application and minimal labor required reduces the production and start-up costs. Unlike other materials, these panels have the benefit of design flexibility. They can be molded into whatever shape that is envisaged to fit the required surfaces. The durability of these panels is unquestionable. Taking a look at most companies will indicate the increased use of frp panels in various aspects. This is mostly influenced by the assured durability vis-à-vis other technologies. This one can be in terms of UV inhibition, reduction of dents and ease of maintenance.

The Various Colors

There are many people who would like to create a proper space either in their kitchen, for their food delivery business, restroom, dining room and so forth and in this regard. There is no better way of doing this than by using fiberglass reinforced panels. These panels are quite popular nowadays and when you’ll start using them, you’ll enjoy diverse advantages shown by these panels. However, there is one thing that any of us will be picky about and that is the color. And when it comes to these panels, you don’t really need to stress over this matter though, because they are available in as many colors as you can imagine. Below this article will tell you more about this.

Colors or Your Own Custom ColorDesert Building Materials - Frp Panels - Sample Colors

First of all, the color you will want your panels to have will depend on where you’d like to install them in. For instance, if you want to create a unique dining space, then you’ll maybe want to go for more contemporary colors, earth tones or even standard frp neutrals. There are many other colors available though and they include slate gray, Seawolf, sandstone, military blue, light gray, Hartford green, dark bronze, boysenberry or beige. This means that regardless of how picky you are about colors, this large collection of them will be enough for you to make a decision that you’ll be satisfied with. In those very rare cases though in which you will just not find the color you need, you can talk to the manufacturer about using a custom color. Just decide on it and then provide them with the code for that color and they’ll happily ensure that every fiberglass reinforced panel you order from them will be painted in your chosen color.

Changing Colors

In some cases, you may also want to alter the fiberglass reinforced panels’ colors by adding an extra coat of paint. Doing so is simple, but you need to do this with care. The first step you’ll need to take is to prepare the fiberglass reinforced panels correctly, because if you don’t do this, then the finish will begin to fail after you’ve applied the coat of paint. On top of that, the paint will need to be applied in a certain way and if you don’t do this, results will be quite unprofessional. The worst scenario would be that the produced finish will be marred with sections of sagging or uneven paint and unattractive brush strokes. If you’re painting them to be used as your main dining area, then you will definitely not like the results. Call in a professional if you’re not good with painting and he will help you out at this stage.

Painting the Frp Panels

1. Painting your frp panels implies certain rules you’ll have to respect precisely so that is why this guide will help you out a lot in this regard. With that in mind, the first step you’ll have to take is to get a water hose and wash the frp panels. After washing them thoroughly, give them some time to dry properly.

2. Now you’ll need to use a fine grit sandpaper in order to scour the frp panels. You’ll need to do so until the fiberglass feel rough.

3. If you haven’t purchased acrylic primer until now, then you’ll have to get some as soon as possible. Once you have it, you’ll need to roll it onto the fiberglass reinforced panels and using a wide bristled brush, smooth the primer onto the panels. You’ll have to do this until all the panels are properly primed. Drying time is estimated at around 2 hours.

4. Use plain water in order to clean the primer from the brush.

5. Lastly, all you’ll need to do is make sure to apply the acrylic paint in the same way as you did with the primer. Drying time is again 2 hours. Eventually, if you’ll see primer showing through, then you’ll just need to apply an extra coat of paint.

As you can see, if you really want to get fiberglass reinforced panels in order to create a wonderful space for dining, cooking or anything else, now you know how painting them in the right color will affect the look and feel of the space they’re installed in. And given the fact that the frp panel colors are very diverse, they’re certainly going to make that space look absolutely wonderful.

Taking a Look at Frp Trims

FRP (Fiber Reinforced Polymer) panels are used in the construction of healthcare facilities and laboratories because of their resistance to mildew and they are much easier to clean than other materials. The trims used for these panels are not just for aesthetic purposes. These also provide maximum sealing so that moisture does not penetrate.

Divider Bars Trims are excellent means of keeping moisture out. Spaces can result from installation of the frp panels, and that creates a collection point for moisture. The divider bars cover those open areas so that mildew and mold are not able to collect. The divider bar also provides a professional look to the installation of frp panels and can come in a number of colors. The bars can control the openings between the panels but there is a point in construction where the frp panel comes to the end of the wall unit. There still remains the possibility of moisture coming in through very tiny openings, and that is why

End Caps Trims are used to finish off a section of the wall. These protect the edges of the panels from wear and tear as well, and are means of securing the wall panels into place for indefinite periods. There are other areas where it is important to seal the panels besides just the spaces in between.

Inside Corners Trims may not seem very important, but these are areas where bacteria can collect, and that is not acceptable. The frp inside Corner molding will block mildew collection in what can be ordinarily an awkward place to clean. When it comes to cleaning, that same molding makes it much easier to maintain over time. There is so much concern about protecting frp panels that one would think these are extremely fragile; almost like glass or bone china. That isn’t entirely true because these panels are built with the idea of being extremely durable. However, the panels themselves are usually put up in places that are not isolated such as a storeroom closet. Frp panels are placed in locations in a healthcare facility where services are actively provided and there is a chance for contact.These structural bruises can result in minor openings occurring in the panels, and that is a problem.

Outside Corner Trims can be considered as the armor that is used to protect the panels from damage. None of the frp trims require major effort to install. They are cut with scissors and slipped onto the edges of the panels prior to installation. Adhesives or nails can be used to attach the moldings to the wall. There should be sufficient space allowed for ordinary expansion and contraction and silicone sealant ought to be used for maximum moisture prevention. In fact, some silicone should be added to any hole created for screws or nails. The concern about stopping mildew and moisture is more than reasonable. The panels themselves are highly resistant but it is at the edges where they are most vulnerable. These are the places where moisture can come in, and all of the above-mentioned frp trims stop that from happening.

It also has to be remembered that frp panels are used in healthcare facilities and hospitals. These are places where infectious bacteria can be found. Should these toxins find a safe place to proliferate, it can cause very serious health challenge. The same type of protection is needed in a residential bathroom where there is a bathtub or shower. Black mold in particular could spawn in crevices, and that is a particular health hazard for anyone with asthma or breathing problems. All of the trims mentioned are the means by which a facility or bathroom are better protected. They also make it easier to clean the walls. There are no stubborn cracks or crevices that have to be worked on, and office maintenance crews can quickly remove dirt and stains. It goes without saying that these moldings also help keep the panels durable and long-lasting. Mildew and moisture are problems that need to be avoided. Frp panels have always been able to keep these problems under control. The trims serve to make the area even more moisture resistant and sanitary.

Transform the Look of Your Wall with Frp Trims

With so much investment going towards building a house, it is always prudent that you ensure that it is not only elegantly designed but also that everything displays class and style. There are a number of ways to accomplish this but most of them are quite expensive. Most people use trims to dress up their walls, hide joints and any other imperfections in the wall surface. With the right choice of color, frp trims can effectively transform the look of your wall, giving your house a contemporary and modish look.

Desert Building Materials - White Frp Panels, Black & White Frp Trims, and Frp Adhesive

Wood or Frp Trims

Most people only know of wood trims. Indeed this is the prevalent notion. However, in the recent years, technology advancement has brought forth other materials that are presenting stiff competition to the long ranging reign of wood trims. There is no doubt that wood is cheap, but plastic polymer is emerging to have better qualities that make it a more effective trim. Wood trims have inherent imperfections that may not be detected until the piece is ready for use in the house. There is always the danger of buying a broken wood only to discover later at the time of installation. Another major weakness, often made to further the argument that frp trims is superior, is the fact that wood is sometimes difficult to drill holes into and is prone to breakages. Unlike wood, frp trims are not susceptible to shrinkage after a few months on the wall.

Frp Trims in Colors

Trims no doubt can help add to a room’s style and architectural finesse to the walls. They also help conceal any flaws on the wall. However, the outcome of all this is to a large extent determined by your color choice. Frp trims are definitely designed to mesh in with any colors of choice but it is always advisable to pick the colors that gels appropriately with the room theme to avoid colors that clash. Within a room, it is highly worthwhile that you paint the same colors unless you want to create some sort of a unique pattern. Painting experts opine that even before you settle on any colors, it would be appropriate of you to try the colors on a single set and place it on the wall just to gauge how it would look like. For most walls, a glossier paint is more elegant, lights the house more and is considerably durable. White is indeed the most preferred colors. Whether your wall adorns a soft or dull colors, you can count on a white trim to transform its look. The reasons why white is touted to be better than the rest is because it lightens and brightens the room giving it a modish look that maintains the correct visual relief. White trims may come in a variety of shades which can be a huge relief to those who do not like stark white. You can get a range of whites that can blend in with you house ranging from warm to cool.

Bathroom Walls

Generally, choosing the right materials and colors for bathroom walls can be a bit tricky. For a start, the trims chosen must be easy to clean and be resistant to mildew. As you take a shower, steam will rise up to the walls leaving droplets that can give rise to mildew spores if you make the wrong choice of the paint. Bathroom walls are not similar to the sitting rooms’ or bedrooms’. You need a different shade of paint in here and experts recommend a semi-gloss one as it addresses the bothersome issue of moisture accumulation. The cabinetry too should have the same kind of paint although there can be slight variations from the wall trims.

Windows and Doors

Windows and door trims are also different from the wall trims and hence adequate attention should be towards choosing the correct shades of color. It is crucial to note that you can accentuate the look of your windows and doors by choosing the perfect colors. Experts often advise that soft and contrasting hue is the way to go. All in all however, there are no rules when it comes to frp trims. You can opt for dark, cool, contrasting or warm colors. The most important thing is to ensure that your choice goes down well with the rest of the house. However, painting sitting room wall trims bright colors accentuates the lighting system and infuses a sense of elegance and style.

An Overview of Different Brand Names of Frp Adhesives

There are different types of adhesives in the market today, some are solvent based adhesives, oil based adhesives, and others are water based adhesives. Listed below are some of the brand names of Adhesives.

Marlite C-375 Solvent Based

Marlite C-375 Solvent based is strong, moisture resistant, flexible and all purpose adhesive which is formulated for easy and quick application. The adhesive has been mentioned as an excellent choice for non porous surfaces. This adhesive guarantees easy application, performance as well as long life. The adhesive bonds the surfaces easily and provides a long open time, for about twenty minutes. It is available in cans measuring 3.5 gallons. When properly applied a gallon of this frp adhesives can cover an area of sixty square feet. Open time for this adhesive can be up to twenty minutes depending on the air movement and temperature. Freezing conditions or extremely low temperature do not affect it. The adhesive has a shelf life of up to twelve months when kept in a tightly closed can. Marlite C-375 Solvent based adhesive meets the ASTM specifications.

Titebond Fast Grab Solvent-Free


Titebond Fast Grab Frp Panel Adhesive a Solvent-Free environmentally friendly superior substance that has no ozone depleting chemicals. The adhesive is known for its fast grab and biding abilities where its power reduce to a great extent the need to have extended bracing. The solvent free formulation makes it safe to use .Unlike the other solvent based adhesives, Titebond Fast Grab Solvent-Free does not burn neither does it emit harmful fumes into the air nor pollute the environment. It is easily cleaned using water, all these characteristics makes it the most environmental friendly adhesive. Titebond Fast Grab Solvent-Free is VOC compliant meaning that it meets the required standards to be used as an frp adhesive. It is specifically made for the installations of Fiber Reinforced panels. The adhesive is recommended by most manufacturers due to its effectiveness in bonding, strength and environmental sensitivity.

Dap 60480 Weldwood Frp Adhesive

Dap 60480 Weldwood Frp Adhesive has the following characteristics; it is non flammable, fast setting and water resistant. It can bond with a variety of services be it concrete, plaster, gypsum or even plywood surface. It is has a latex based formula which makes it ideal for bonding panels. Cleaning Dap 60480 Weldwood Frp Adhesive is easy one only needed to use soapy water when it is wet and mineral spirit when it has dried. One gallon of Dap 60480 Weldwood Frp Adhesive can cover an area of forty to fifty square feets.

Henry, WW Company Gal Frp Adhesive

Henry, WW Company Gal Frp Adhesive is used over wood studs, dry concrete, plywood, and drywall and plaster surfaces. It is a product which is described as strong, fast setting and resistant to moisture. It is also not flammable. The product has been endorsed by all the major manufacturers and dealers of Fiberglass Reinforced Panels. It comes with a warrant of ten years, this just show that the product is durable and can serve for a long time. The product does not require any open time but it gibes a thirty minute working time. One gallon of Henry, WW Company Gal Frp Adhesive can cover an area of 50 to 60 square feet.

OSI Frp-555 Fiberglass Construction Adhesive

OSI Frp-555 Fiberglass Construction Adhesive is a flexible and strong adhesive made for frp installation. The product is easy to cure and trowel to give the surface a strong and flexible bond. OSI Frp-555 Fiberglass Construction Adhesive is not easily affected by moisture, heat or cold situation when fully dry. The product does not burn making it environmental friendly as well as safe for use. Its ability to offer a high initial grab reduces the panel slippage. OSI Frp-555 Fiberglass Construction Adhesive gives a 25 to 30 minutes repositioning time allowing for correction if there is any misalignment. It is easy to clean using water and soap when wet and spirit when dry. The OSI FRP-555 Fiberglass Construction Adhesive is recommended for bonding frp on plywood, plaster and porous surface. The formulation should not be used for bonding to cement boards, metal ceramic, high gloss enamel, bowed or bent panels surfaces.

Desert Building Materials - Frp Panels - Frp Adhesive


Most manufacturers today have started using adhesives in place of traditional binding techniques such as screwing and welding. This is somewhat ascertained that there are indeed several advantages of frp adhesives over other techniques. Sometimes during manufacturing, there are challenges that arise when you want to bind materials together. This is specially required when you want such materials to retain their individual beneficial properties. The main question in such instances is what method to use so as to retain these individual properties. Mechanical techniques that were before regarded to be the best have demonstrated inherent weaknesses overtime. The weaknesses are later reflected in the design of the product. Some of these techniques for instance require holes to be drilled which damages and weakens the materials. It is these weaknesses that make a strong case for the use of frp adhesives both in industrial and domestic sectors.

Wide Variety of Materials

According to the experts, there is ultimately no limit up to which the materials can be bound together. If you take a look at most manufacturers nowadays you will be amazed by the use of plastics and glass in the production of most of the items that were made of wood and metal before. While the quality may not be similar, this ease of production is credited to adhesives. Apart from these, the above mentioned adhesives are also used to bond ceramics and wood joints firmly creating a tightly sealed and elegantly designed product.

Weight Reduction

Heavy equipment are sometimes associated with durability and quality. However, it is not always that weight measures the quality, keeping the issue of stability aside. Locomotives, vehicles and ships need to strike a delicate balance in this. When other bonding techniques are used, other than frp adhesive, there is a likelihood of having an end product that exceeds the required weight. This often has a major repercussion on fuel consumption and also in the amount of pollutants emission released to the environment. Frp adhesive is more appropriate in such instances as it bonds without having any impact on weight.

Noise and Corrosion

One major disadvantage of using rivets and screws is their inherent property of reacting with oxygen to cause rusting and corrosion. This is a nonexistent worry when it comes to frp adhesive. Over time, due to corrosion, rivets and screws become weak, causing imbalance in the structure and annoying squeaky noises. This hence means that there has to be constant servicing to repair any corroded rivets and screws. Adhesives provide adequate resistance to shocks and vibrations that would otherwise weaken unions if prolonged. In addition to corrosion, the impact of harsh weather conditions results to unexplained contractions and expansions which eventually damage the product.

Cost Efficiency

The use of frp adhesive when bonding does not often result into additional expenses. Other bonding technologies require the materials and substrates to be deformed or improved to suit the final design. The metal has to be ground and this is definitely an additional cost in manufacturing. This grinding process often hampers the aesthetics of the end product. Reducing the number of additional materials used such as nuts, rivets and screws to create a perfect union no doubt reduces the cost of manufacturing.


An elegant looking end product should be homogeneous with the several materials used. There has to be equal distribution of tension in all parts of the product eliminating any instances of stress concentrations to any part of the product hence reducing any likelihood of fracture.


Most bonding techniques often infuse a sense of rigidity to a product design. This means that the design is tailored to stick within the limitation of the bonding techniques. Rivets and screws are often the main culprits in this constraint. Using frp adhesive however corrects this allowing the design to have more improved aesthetics.

Thermal Stability

Frp adhesive is tailored to withstand all manner of thermal exposures. The previous technology could not withstand more than 200 degrees Fahrenheit. However, today, frp adhesive has demonstrated satisfactory performance even when exposed to temperatures beyond 500 degrees Fahrenheit. The key to this spectacular design is credited to the introduction of new chemical structures that allow adhesives to be cured over a wider spectrum of temperatures. Other properties that enhance adhesive performance include withstanding prolonged exposure to salty water and UV light. Most of other bonding techniques cannot endure such conditions and often require constant and timely servicing, improvements and replacement to ensure that maintenance of the union.

Article Summary

1. Cheap and easy to install frp panels come with great benefits for construction purposes. The panels can be applied in recreational areas, cooling towers, hallways, hospital rooms, classrooms, offices and kitchens etc.

2. This is about their benefits. It contains information about the various sizes it comes in and the finish surface types on which it may be applied.

3. They are available in many different colors. They can also be painted with custom colors. The surface has to be prepared correctly in order for this to work.

4. The article speaks about the benefits of using frp trims over wood trim. Advice related to color schemes also mentioned for different rooms’ walls, windows and doors.

5. The article provides a brief overview about frp trims. It also highlights the process of applying frp trims to frp panels. The use of frp adhesive has increased in the manufacturing industries because of its numerous benefits over the other typical bonding methods. Frp adhesive is more durable, cost efficient, stable, and causes reduction in weight, noise and corrosion.

Desert Building Materials

202 S. 30TH Street

Phoenix, Az. 85034

Frp Panels Section

Office # 602-267-1121